Filter
Top Products
Installation
Fit the front panel with the remaining
screws provided and the hinge
screws.
Example 2:
Drill the numbered holes and the
screw points for the inner door panel
to the specified depth.
On chipboard fronts: inject silicon
sealant (supplied) into the (= Ø 10
mm) free holes.
Note that some different holes are re-
quired for left or right hand hinging.
Left hand hinging:
left markings (template), holes 1, 2, 3,
4, 5
Right hand hinging:
right markings (template), holes 1, 2, 6,
7, 8
Unscrew the lower screws on the top
hinges on both the left and right
hand sides of the door, (see illustra-
tion).
Screw the front panel on through the
drilled holes 1 and 2 on the inner
door panel (see template) - do not
screw tight (screws are supplied).
Align the front panel.
Tighten the screws.
Drill any more holes required through
the drill holes in the door inner panel.
Securely fit the front panel with the re-
maining screws provided and the
hinge screws.
39