Filter
Top Products
How to wash correctly
Curtains:
Remove lead weights and strips or
place in a laundry bag.
Any loose wiring in bras etc.,should be
removed or swen in.
Woollens and knitted garments:
Turn inside out, if the manufacturer rec-
ommends it.
3 Close the drum door
Make sure that there is no obstruction
between the drum door and seal.
4 Open the stopcock.
5 Add detergent.
See Section on Detergent for details.
To start a programme
1 Turn the programme selector
to Finish / Start.
2 Press the “I-ON/0-OFF” button.
3 Press additional option button
where required
See Section on the “Delay start” option.
4 Select spin cycle speed
5 Position the programme selector
on the the desired programme
The programme selector can be turned
to the left or the right.
After washing
1 Turn the programme selector
to “Finish/Start”
2 Press the “I-ON/0-OFF” button.
3 Press the “Door” button.
Only remove washing from the ma-
chine once the drum has stopped
turning, otherwise you may seri-
ously injure yourself.
4 Remove the washing
5 Check the folds in the door seal
for any small articles such as but-
tons which might be lodged there.
Make sure the drum is empty, other-
wise, when the machine is next
used items may become damaged
(e.g. shrink) or cause other washing
to discolour.
6 Close the drum door.
Otherwise there is a danger of objects
being placed inadvertently in the drum.
If these remained unnoticed and were
washed in the next load, they could
damage the washing.
11