Problem solving guide
Repair work to electrical appliances should only be carried out by a suitably
qualified person in accordance with local and national regulations. Unauth-
orised repairs could be dangerous.
What to do, if . . . Cause . . . Remedy . . .
. . . The programme
does not begin.
There is no power.
The "Anti-crease-Finish" light is
not on.
Check whether:
– the door is properly closed.
– the mains plug is plugged in.
– the fuse or circuit breaker
has not tripped.
. . . the "Check drain" light
flashes during the pro-
gramme, but the programme
is running normally.
The water outlet is restricted.
– Clean the fluff (drain) filter
and drain pump.
– Has the drain pump been
fixed too high? (Max. drain
height 1m).
. . . the "Check drain" light
flashes during the pro-
gramme, but the programme
is not running normally.
The water outlet is blocked.
– Clean the fluff (drain) filter
and drain pump.
– Has the drain pump been
fixed too high? (Max. drain
height 1m).
Problem solving guide
43