Filter
Top Products
Programmable functions
Programmable functions enable the
user to introduce further features as
required. They remain stored in
memory until they are cancelled by
the user.
Maximum water level
The water level for rinsing is automati-
cally raised to the maximum level
where rinse results are particularly
important.
It is effective for the rinses in the follow-
ing programmes:
- Cottons
- Minimum iron
- Quick wash
- Mixed wash - Poly/Cottons
Before the "Maximum water level" pro-
grammable function can be selected
you must first select programming
mode.
Selecting programming mode
1 The machine must be switched off
and the drum door closed. The pro-
gramme selector must point to "Fin-
ish".
2 Press the additional option buttons
"Short" and "Water plus" at the same
time and hold pressed in and:
3 . . . switch the machine on with the
“I-ON/0-OFF”-button.
4 Let go of all these buttons.
The indicator light "Main wash" flashes
in the sequence display.
Selecting the programmable function
To select the "Maximum water level"
programmable function: turn the pro-
gramme selector to –
MIXED WASH Poly/Cottons***.
Activating
To activate "Maximum water level"
press the "START" button once.
The "Rinses" light comes on in the se-
quence display.
Storing in memory
To store the "Maximum water level" pro-
grammable function in the memory
SWITCH the machine OFF with the
“I-On/0-OFF" button.
The "Maximum water level" programm-
able function is now stored in the ma-
chine’s memory and is effective in the
programmes described above until
such time as you may wish to deacti-
vate it.
Deactivating
To deactivate the use of a maximum
water level in the rinses repeat the pro-
cedure given above from point
1 as
far as the *** shown above. Press the
START button and the “Rinses” indica-
tor light will go out. The function is now
deactivated. Store in memory by press-
ing the I-On/0-Off button.
Programmable functions
30