Filter
Top Products
~
Faulty components must only be
replaced with genuine Miele spare
parts.
~
If the power cord is damaged it
must only be replaced by a Miele
Service technician with a genuine Miele
power cord.
~
Under certain conditions, hydrogen
gas may be produced in a hot water
system that has not been used for 2
weeks or more. HYDROGEN GAS IS
EXPLOSIVE. If the hot water system has
not been used for such a period, turn
on all hot water faucets and let the
water flow from each for several
minutes before using the washing
machine. This will release any built-up
hydrogen gas. Do not smoke or use an
open flame during this time, the gas is
flammable.
~
Before the appliance is removed for
service or discarded, remove the door.
Use
~
Do not allow children to play on or in
the appliance. Close supervision is
necessary when the appliance is used
near children.
~
The drum door glass will be hot
when washing at very high
temperatures.
Do not touch the glass. Danger of
burns! Keep children away from the
washer when in use.
~
Only use the washing machine to
wash items which are specified by the
manufacturer to be machine washable
on the fabric care label. Any other
applications may be dangerous. The
manufacturer cannot be held
responsible for damage caused by
improper use of the appliance.
~
Do not wash articles that have been
previously cleaned, washed, soaked or
spotted with gasoline, dry-cleaning
solvents or other flammable
substances. These articles give off
vapors that could ignite or explode. Do
not add these items to the wash load.
~
Do not add gasoline, dry-cleaning
solvents, or other flammable or
explosive substances to the wash
water. These substances give off
vapors which could ignite or explode.
~
Do not use cleaning solvents on or
near the machine or the controls.
Contact with cleaning solvents will
damage the surface.
~
Do not reach into the appliance if
the drum is moving.
~
Do not tamper
with the controls.
~
The control panel must only be
exchanged or removed by an
authorized Miele Service Technician. If
the control panel is not professionally
exchanged there is a danger of electric
shock and the machine may be
damaged.
SAVE THESE
INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
5