Filter
Top Products
The display shows a fault message
Issue Possible fault Fix
1)
q
Drain fault
Check drain
– The drain is
blocked.
– The drain hose is too
high.
– Clean the drain filter and
the drain pump.
– The maximum drain
pump height is 3 ft (1m).
p
Water inlet fault
Open water faucet
– The water intake is
blocked.
Possible fault:
– check if the water supply
is open all the way.
– the inlet hose is kinked.
o
Waterproof system
activated
The waterproof system
has activated.
Call Technical Service.
,
Technical fault
Call Technical Service
There is a fault. Restart the program.
If the fault message
appears again contact
Technical Service.
In the display flashes
Anti-crease
alternating with
Check detergent
The machine has
oversudsed.
Use less detergent in the
next wash program, and
follow the recommended
amount on the detergent
packaging.
1) To turn off the fault message:
^ To turn the fault message off: Open the drum door or press the "Pause" button
until the fault message goes out.
Frequently asked questions
32