Filter
Top Products
Preparing the washing
machine
Before using the machine for the first
time ensure that it is correctly
installed and connected. See
"Installation and connection". Also
check that the drain filter is securely
tightened to prevent the risk of water
leaks during use.
This washing machine has
undergone a thorough functional test
in the factory and there will be some
residual water in the drum from this
process.
^ Press the I-On/0-Off button in.
If the washing machine is being
switched on for the first time, the
welcome screen will appear.
The welcome screen will appear in the
display every time the machine is
switched on until a programme lasting
longer than 1 hour has been
completed.
The display for setting the language will
then appear.
Setting the language
You will be asked to select the
language you require for the display. It
is possible to change the language at
any time via the Settings menu.
Sprache
deutsch
) OK
^
If the language shown is not the one
you want, select the language you do
want by pressing the left hand Menu
button under ). Confirm your
selection by pressing the right hand
Menu button under OK.
Setting the time of day
The display for setting the time will then
appear.
12:00
Change
OK
^ Select the hours you want by pressing
the left hand Menu button under
Change, and confirm this with the
right hand Menu button under OK.
^ Then set and confirm the minutes.
Reminder to remove transit bars
To avoid the risk of damage, the
transit bars must be removed before
the machine is used for the first time.
See "Installation and connection" for
instructions on how to do this.
^
After removing the transit bars (if this
has not already been done by your
fitter) press the right hand Menu
button under OK.
Reminder to remove the dispensing
unit
^
Open the door and remove the
dispensing unit (liquid detergent
container).
^
Confirm that you have removed the
dispensing unit by pressing the right
hand Menu button under OK.
Before using for the first time
13