Filter
Top Products
Installation
Sizing the toekick
The appliance toekick visible below the
door can be partially conceated by in-
stalling a custom made toekick that
matches the adjacent cabinetry.
Please note: The depth of recess
and height of the appliance toekick
cannot be altered.
The lenght of the matching toekick
should be 23
5
/8" (600 mm). Maximum
toekicks heights are listed below.
Height from the
floor to the bot-
tom of the
countertop
Number
of
spacer
frames
rquired
Maximum
toekick height
32
1
/4" (820 mm) none 3
15
/16" (100 mm)
34
1
/4" (870 mm) 1 5
15
/16" (150 mm)
36
1
/4" (920 mm) 2 7
7
/8" (200 mm)
The matching toekick must be cut
out so that access to the emer-
gency drain and door release panel
is not impeded.
Installing the toekick
Align and attach the two Velcro
strips to each other. Cut the strip into
three equal pieces.
Remove the protective backing from
one side of the three Velcro strips.
Press them into place on the washer
toekick.
Peel the protective backing off of the
second, exposed side of the Velcro
strip.
Align the matching toekick with the
machine toekick and press it fimly
into place.
Washer-Dryer stack
This Miele washing machine can be in-
stalled as a washer/dryer stack
together with a Miele tumble dryer. For
this purpose, a stacking kit, available
from the Miele Parts Dept., is needed.
A washer and dryer should never
be stacked without using the
proper stacking kit.
Installation
38