Miele W3922 Washer User Manual


 
Final spin speed
Programme rpm
Cottons 1600
Minimum iron 1200
Delicates 600
Woollens 1200
Automatic 1200
Shirts 600
Express 1600
Denim 900
Hygiene 1600
Dark garments 1200
Curtains 600
Pillows 1200
Silks 400
Sportswear 1200
Outerwear 800
Proofing 1000
Drain / Spin 1600
Separate rinse 1200
Starch 1500
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected in the
Cottons and Hygiene programmes, an
additional rinse is introduced.
To omit the final spin (Rinse hold)
^
Press the Further extras button and
select the Rinse hold setting. The
laundry will not be spun and will
remain suspended in the final rinse
water. This reduces creasing if the
laundry is not going to be removed
from the drum immediately after the
end of the programme.
To start the final spin
:
The washing machine will display the
maximum spin speed possible. You
can select a spin speed lower than
this. Start the final spin by pressing
the Start/Stop button.
To end the programme
:
Press the Door button. The water will
drain away. Press the Door button
again to open the door.
To omit rinse and interim spin and
the final spin (No spin)
^
Select No spin from the spin speed
menu. The laundry is not spun after
the final rinse. The water will drain
away and the machine will go straight
into the anti-crease stage. An
additional rinse is introduced if this
setting is selected with the Cottons,
Hygiene, Minimum iron, Express and
Automatic programmes.
Spinning
23