Filter
Top Products
Final spin speed
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected for a
Cottons programme, an additional rinse
is introduced.
To omit the final spin (Rinse hold)
^
Press the "Spin" button repeatedly
until the Rinse hold indicator light
comes on. The laundry will not be
spun and will remain suspended in
the final rinse water. This reduces
creasing if the laundry is not going to
be removed from the drum immedi
-
ately after the end of the programme.
–
To start the final spin
:
Use the "Spin" button to select the
spin speed you want. The final spin
will then begin.
– To end the programme
:
Press the Door button. The water will
drain away. Press the Door button
again to open the door.
To omit the spin between rinses and
the final spin
^ Press the "Spin" button repeatedly
until the Without spin indicator light
comes on. The laundry is not spun
after the final rinse. The water will
drain away and the machine will go
straight into the anti-crease stage.
With some programmes an additional
rinse is introduced if this setting is
selected.
Spinning
22
Programme rpm
Cottons 1400
Minimum iron 1200
Automatic plus 900
Dark garments / Denim 1200
Express 20 1400
Shirts 600
Woollens / 1200
Delicates 600
Drain/Spin 1400
Separate rinse/Starch 1200