Filter
Top Products
The programmable functions are
activated with the help of the
Start
button and the programme selector.
Water plus system
This is used to select the water intake
setting for the
Water plus
additional
option.
There are four different options:
Setting 1:
an increase in the rinse water level
Setting 2:
an increase in the water level in the
main wash and
rinses (the washing
machine is delivered with setting 2
programmed as standard)
Setting 3:
an extra rinse cycle in the
Cottons
and
Minimum iron
programmes
Setting 4:
an increase in the water level in the
main wash and
rinses and also an extra
rinse cycle in the
Cottons
and
Minimum
iron
programmes
Follow steps A to G to programme
and store a setting in memory.
Before you begin, first ensure that:
–
The washing machine is switched off.
–
The machine is properly closed.
–
The programme selector is at
Finish
.
A Press the
Start
button and keep it
pressed in whilst carrying out steps
B-C.
B Switch the machine on with the
I-On/0-Off
button.
C Wait until the
Start
button indicator
light comes on . . .
D . . . and then release the
Start
button.
E Turn the programme selector to the
Cottons 60°C
position:
A P will flash in the display alternating
with the number 1, 2, 3 or 4.
F Each subsequent press on the
Start
button selects a different setting.
The number alternating with the P in
the display refers to the settings as
follows:
1 = Setting 1
is selected
2 = Setting 2
is selected
3 = Setting 3
is selected
4 = Setting 4
is selected
G Switch the machine off with the
I-On/0-Off
button.
The
Water plus
button has now been
allocated the setting you have chosen.
This setting will remain in memory until
another setting is programmed.
Programmable functions
56