Filter
Top Products
,
WARNING
Before installation, disconnect the
tumble dryer from the electrical
supply by shutting off the power
main or tripping the circuit breaker.
Be sure the dryer power cord is
unplugged from the wall.
Do not restore power until the
installation is complete.
Turn the dryer’s gas shutoff valve in
the supply line to the OFF position.
Disconnect and discard old flexible
gas connector and ducting material.
Determining the position of the
exhaust connection
The exhaust connection can be left at
the rear of the dryer (factory standard)
or moved to the left or right side.
Changing the position of the exhaust
connection
^
Remove the restriction insert.
,
WARNING
With left or right exhaust
connections, the restriction insert
must be integrated into the side
exhaust ducting guide.
Otherwise poor drying results,
damage to the laundry and higher
Carbon monoxide emissions may
occur.
^
Place the restriction insert into the
adapter (see "Exhaust connection
with a flexible exhaust hose or rigid
pipe").
^
Remove the exhaust connection
cover on the left or right side of the
dryer by turning it counterclockwise
and take it out.
^
Firmly press the cover into the rear
exhaust connection.
Installation
12