Filter
Top Products
Removing
^
Place the fluff filter (1) on a flat
surface.
a Press holder (2) on the filter frame
gently
inwards until the filter frame
disengages from the fluff filter.
b Pull filter frame (3) out of the fluff filter
by the holder.
^ Remove fine filter (4).
Cleaning
^
Clean the fine filter thoroughly under
running water.
^
Then squeeze the fine filter
thoroughly.
^
Clean the fine filter frame, if
necessary.
^
The surface of the fluff filter must also
be cleaned under running water if
there is a great deal of compacted
fluff on it.
^
Dry the fluff filter and the filter frame.
Replacing
^
Place the fluff filter (1) on a flat
surface.
^ Place the fine filter (4) exactly in the
middle of the hollow area in the fluff
filter.
^ Place the fine filter frame (3) on the
fine filter - the holder (2) must face
upwards.
^ Press the fine filter frame at the top
and bottom until it clicks into position
in the fluff filter.
^
Push the filter back into the door until
it clicks into position. Ensure it is
facing the correct way.
Cleaning and care
30