Display
Various pieces of information are
shown in the display:
- the length of time a programme still
has to run (time left);
- the length of programme selected
for timed drying;
- the number of hours selected for the
delay start option;
- programmable functions as they are
switched on or off.
Time left indicator
Once a programme has started, the
electronics calculate how long the pro-
gramme will last and the following sym-
bols: === ...
-
== ... appear in the display.
After approximately a minute the length
of the programme will appear and a
countdown in minutes will commence.
The time left can vary with each pro-
gramme because it is dependent on
several factors:
– the quantity, type and residual mois-
ture of the various items in the load;
– variations in electrical current;
– the surrounding temperature.
The time left should therefore only be
regarded as an estimate. However, to
make this estimate as precise as
possible, the machine has intelligent
electronics that are capable of “learn-
ing”. During the first 10-15 programmes
run in the machine, the electronics will
monitor your individual laundry items
and adapt accordingly.
Each load should ideally be made
up of items of the same size. The
time left will vary more if items are of
very different sizes. In this case the
time may stop counting down
shortly before the end of the pro-
gramme, (see the "Problem solving
guide").
Display
18