Filter
Top Products
D Select a programme
^
You can select a programme either
by:
–
using the appropriate short cut
button to select one of the four most
frequently used programmes
('favourites'), or
–
by going into the
Programme
Selection
menu.
^
If required, you can then select any
Extras
and use the
Timer
from the
relevant sub-menu.
The
Start
button will flash as soon as a
programme can be started.
E Start the programme
^ Press the
Start
button.
The
Start
button will light up.
–
Programme start
will appear in the
display, followed by
drying
and the
programme duration.
–
With sensor drying programmes the
drying level reached, e.g.
Machine
iron
,
Hand iron
r, etc. will show in
the display.
Once drying is in progress, you can
press short cut:
–
Button
2
Timer
to call up the current
time of day and the estimated end
time of the programme.
–
Button
3
Save
to save the current
programme as a favourite.
–
Button
4
Cancel
to cancel the
current programme.
Estimated time remaining
When a programme is selected the
estimated drying time will appear in the
display. Please be aware that it is only
an estimate!
The following factors all affect the
estimated time remaining: Residual
moisture content after spinning; type of
fabric; size of load; room temperature;
fluctuations in power supply.
The electronics continually assess
conditions in the machine and adjust
the estimated time remaining for a more
accurate reading. Because of this the
time displayed can alter during the
course of a programme.
In the same way, the
Woollens
handcare
and
Smoothing
programmes
can finish earlier than expected if a
certain temperature is reached. This
can happen with particularly fine
fabrics or if items were dry beforehand.
How to dry correctly
15