Filter
Top Products
To change the exhaust connection
from the rear of the machine to the
left side of the machine
^ Remove the vent socket from the rear
exhaust port by inserting a thin
screwdriver into the slot by the retain-
ing clip. Press the clip gently up-
wards and at the same time turn the
connector counterclockwise.
^
Press the retaining clip of the cap
covering the left exhaust port up
-
wards, turn it counterclockwise.
^
Secure the connector into the side
port by pressing it in and turning it
clockwise.
^
Seal the rear exhaust port with the
cap.
INSTALLATION INSTRUCTIONS
31