Filter
Top Products
Installation, repair and mainte
-
nance work should be by a Miele
authorized service technician. Work by
unqualified persons could be danger
-
ous and could void the warranty.
Before installation, disconnect the
tumble dryer from the electrical
supply by unplugging the power cord
or tripping the circuit breaker.
GROUNDING INSTRUCTIONS
This appliance must be grounded.
In the event of malfunction or break
-
down, grounding will reduce the risk of
electric shock by providing a path of
least resistance for electric current. This
appliance is equipped with a cord hav-
ing an equipment-grounding conductor
and a grounding plug. The plug must
be plugged into an appropriate outlet
that is properly installed and grounded
in accordance with all local codes and
ordinances.
WARNING – Improper connection
of the equipment-grounding con-
ductor can result in a risk of electric
shock. Check with a qualified electri
-
cian or service representative or per
-
sonnel if you are in doubt as to whether
the appliance is properly grounded.
Do not modify the plug provided
with the appliance: if it will not fit
the outlet, have a proper outlet installed
by a qualified electrician.
This dryer must be vented out
-
doors.
Install the venting in such a way
that the expelled air cannot be
drawn back into the machine.
Do not vent the dryer into a chim
-
ney used by gas, fuel boilers, heat
-
ers, a chimney, a wall, a ceiling, or a
concealed space of a building.
If there is any doubt concerning in
-
stallation contact Miele’s Technical
Service Department.
USA 1-800-999-1360
techserv@mieleusa.com
CDN 1-800-565-6435
service@miele.ca
IMPORTANT SAFETY INSTRUCTIONS
23