Filter
Top Products
Changing the light bulb
,
WARNING
To reduce the risk of electric shock,
disconnect this appliance from the
power supply by unplugging or trip
-
ping the circuit breaker.
^ Unscrew the plastic bulb cover lo-
cated inside the drum and above the
door (see illustration.)
^
Replace the light bulb with a temper
-
ature proof bulb (part # 02 150 900)
available from Miele’s Technical Ser
-
vice Department.
The light bulb must not exceed the
maximum wattage quoted on the
data plate.
^
Refit the plastic bulb cover.
Take care that the bulb cover is
tightened into place. Otherwise
moisture may penetrate the socket
and cause a short circuit.
Power failure - Emergency
door release
^ Pull forward on the unhinged side of
the door.
Dryer care
17