Filter
Top Products
What to do if,...? Cause . . . Remedy . . .
...drops of water
appear along the upper
edge of the drum door?
This may not be a
problem. A dual filter
system with two seals is
used to prevent lint from
becoming deposited in
the heat exchanger.
These two seals may
occasionally cause
condensed water to form
on the door.
Laundry coming into
contact with these drops
of water will dry within a
few minutes.
. . . after cleaning the
heat exchanger, water
leaks from the machine?
Check that the heat
exchanger door has been
replaced correctly. If
necessary, remove and
replace it.
. . . the interior drum
light fails to function?
See "Changing the light
bulb".
...you have to open the
door in the event of a
power failure?
See "Power failure –
Emergency door release".
Frequently asked questions
19