Filter
Top Products
Connecting to an external
drain
The condensed water can be sent
directly to a drain if the machine is
installed near a sink or standpipe.
The machine is equipped with a non-
return valve that will prevent water from
flowing back into the machine if there is
a problem in the drainage system.
Max. drain hose length: 10 ft
Max. drain height: 4 ft.
Supplied accessories:
- 6 ft drain hose
- Hose clamp
- Hose elbow
To make a direct drain connection,
proceed as follows:
^
Loosen the hose clamp at the drain
outlet at the rear lower left of the
machine and remove the rubber
plug.
^ Remove the clamp from the plug and
place it over the drain hose.
^ Push the drain hose onto the drain
outlet. Make sure that the hose is not
kinked and firmly secured by the
hose clamp.
Installation
26