Filter
Top Products
Clean out airways indicator
Fluff should be removed after drying.
The Clean out airways indicator will
remind you to clean the filters when a
certain amount of fluff has collected
in the filters. You can decide at what
level of fluff this reminder should be
given.
You will have an idea of which of the
four options to select after a few drying
programmes.
Follow steps A to F to programme
and store in memory.
Before you begin, first ensure that
:
– The tumble dryer is switched off.
– The door is closed.
APress the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
BPress the I-On/0-Off button in.
Wait until the indicator light for the
Start/Stop button lights up
constantly ...
C. . . and then release the Start/Stop
button.
DPress the Low temperature button
four times.
–
The Low temperature indicator light
will flash on and off slowly once.
–
P and 2 (default setting) will flash
alternately in the display.
The number which appears alternately
in the display with P means:
0 The Clean out airways indicator
light is deactivated
I The Clean out airways indicator
light will come on when there is a
heavy build-up of fluff
(The Automatic indicator light will
also flash once).
2 Default setting
(the Automatic indicator light will also
flash twice).
3 The Clean out airways indicator
light will come on when there is
only a light build-up of fluff
(The Automatic indicator light will
also flash three times).
EPressing the Start/Stop button
switches from one to the other.
FSwitch the dryer off with the
I-On/0-Off button.
The setting you have selected is now
stored in memory. You can change it
again at any time.
Programmable functions
50