Filter
Top Products
Skipping program cycles
Cycles of a program in progress can be
skipped or repeated.
^
Press the f "End" button to stop the
program.
1 Hot Wash
Program stop
i ü f
^
Press the ü "Skip" button. The display
shows the current area, block or step.
See also "Program structure" in the
Programming manual .
Skip -> 1 Hot Wash
Program stop
Area 2: Main wash e
S A
Area: 2 Main wash
Block 1: Main wash
Step: Wash time 2 -
S A
^ Turn the jog shuttle to "Area" and press it to
confirm the selection.
Area: Select either 1 Prewash, 2 Main
wash or 3 Rinse and confirm by pressing
the jog shuttle.
^
Turn the jog shuttle to "Block" and press it
to confirm the selection.
Block: Select either Prewash 1-10, Main
wash 1-10 or Rinse 1-10 and confirm by
pressing the jog shuttle.
^
Turn the jog shuttle to "Block" and press it
to confirm the selection. Select the desired
program step and confirm.
^
To start the new program step press S
"Save" and h "Start".
To go back without skipping a program
cycle
^
Press the A "Back" to go back to the
program stop.
Program sequence
The program sequence is shown in the
display after the start of the program.
1 Hot Wash
104 °F Pre-wash 68 °F
Main wash End at 12:35
+im k mKf
The second display line, here Pre-wash, the
wash water temperature is shown.
1 Hot Wash
194 °F Main wash 140 °F
Rinse 1 Cold End at 12:35
+im k mKf
If the program block Pre-wash has ended,
the 2nd line in the display shows the
program block Main wash with the current
wash water temperature. The 3rd line shows
the following program block, here Rinse 1.
The program end display, above 12:35,
shows the time of day when the program will
be finished.
Use
18