Filter
Top Products
Control keys
^
Press once to activate the function, press
again to deactivate the function.
i Manual operation
(Used by Miele Service Technicians)
See the Programming manual.
FC Functions
Press this key to temporarily select another
language and/or access the operator level.
A Back to the previous display
+ i Block plus
The respective program block, e.g. prewash,
will be added to the program.
m Starch Stop
Press this button to stop the program and
allow starch to be added to the laundry.
k Spin Stop
Press this button if a final spin is not required
after the final rinse.
m Delay start
Press this key to select a start time in the
display.
K Information
To show program information
f Stop/Finish
Press to stop a selected program or to end
an already stopped program.
q Drain
ü Skip
Cycles of a program in progress can be
skipped or repeated.
e/- Following or previous line
S Save
See the Programming manual.
$ Program locked
If a program is locked it cannot be stopped
or ended with the Off-button after 1 minute.
) Program unlocked
ß Dispensing
ä Dispensing not available
\ Operating data
-> l <- Reset to 0 (zero)
To reset the load sensor to "00.0" when the
drum is empty and the display shows a load
size.
D Data transfer
Operator Card
No programs are saved on this card. To
transfer the data from the control to the card
and vice versa see the Programming
manual.
30 programs containing 6 blocks each can
be saved on the card.
The rear side of the card can be labeled.
Guide to the washer
9