Filter
Top Products
MINIMUM IRON duration
The program "MINIMUM IRON"
allows you to extend the wash time
for the main wash.
The machine comes factory set with the
option Block Parameter selected. (The
wash time will be controlled according
to the factory set program data.)
Special programs list
Special programs can be added to
the program selection.
Option 1: The programs Quick wash,
Shirts, Starch, Pillows, Outerwear and
Proofing are shown. (Factory set)
Option 2: In addition to option 1
"Intensive wash" is offered.
Option 3: In addition to option 1 "Flour",
"Flour +" and "Grease and fat" are
offered.
Option 4: In addition to option 1
"Grease and fat" and "Grease and fat +"
are offered.
Option 5: In addition to option 1 "Towels
short", "Towels +" and "Capes" are
offered.
Option 6: In addition to option 1 "Chem.
Therm. Dis." (Chemothermal
Disinfection 20 minutes 60°C) is
offered.
Hygiene
If a temperature lower than 140°F
(60°C) was selected for the last
wash program "Hygiene" is
displayed.
The machine comes factory set with
this option "off".
Pre-wash
For the programs "COTTONS" and
"MINIMUM IRON" pre-wash can be
permanently added.
If the pre-wash is permanently
selected, the indicator of the pre-wash
button lights.
The machine comes factory set with the
option "Menu selection" activated.
COTTONS rinses
The program "COTTONS" allows you
to change the number of rinses.
2 rinses (factory set)
3 rinses
4 rinses
5 rinses
Menu Settings - Supervisor level
62