Filter
Top Products
Program max. rpm
COTTONS 1400
MINIMUM IRON 1000
DELICATES 600
Towelling 1400
Table linen 1200
Bed linen 1200
Curtains 400
Denim 900
Dark garments 1200
WOOLLENS 1200
Drain/Spin 1400
Quick wash 1200
Shirts 600
Starch 1200
Pillows 1400
Outerwear 900
Proofing 800
Extra Rinse 1200
Intensive wash* 1400
Flour* 1400
Flour +* 1400
Grease and fat* 1400
Grease and fat +* 1400
Towels short* 1400
Towels +* 1400
Capes* 600
Chem. Therm. Dis. 20 min* 1400
* = Programs can be added from the "Settings -
Supervisor level" when activated by Technical
Service.
The final spin speed can be reduced.
The speeds shown above are the
highest available.
Rinse spin
The laundry is spun after the main wash
and between the rinse cycles.
Reducing the final spin speed will also
reduce the rinse spin speeds.
To omit the final spin (Rinse hold)
^
Select "Rinse hold". The laundry is not
spun and remains soaking in water.
This will prevent wrinkles if the
laundry is not removed immediately
at the end of the wash program.
If the laundry consists of a mixed load,
articles which do not require spinning
can be removed at this time.
– Starting a final spin
^ Select a final spin speed with +.
The final spin starts.
– To finish the program
^ Press – or "Door". The water will
drain.
^
Press the "Door" button to open the
door.
To omit rinse spin and final spin
^
Select "Without spin".
The laundry is not spun after the final
rinse but the water is drained away.
After the drain cycle the washer goes
immediately into the anti-crease cycle.
Selecting a spin speed
24