Filter
Top Products
Any residual water left in the
machine from the factory test
-
ing process can be flushed out
as follows:
^
Do not put any laundry in the ma
-
chine.
^
Place 1/4 of the recommended
amount of detergent in compartment
j.
^
Turn on the machine.
^
Press the “Rapid wash” button.
^
Turn the program selector to the
“COTTONS 140°F” program.
^ Any residual water will be flushed out
during the wash program.
Water hardness reminder
The amount of detergent needed to
wash clothes depends on various fac
-
tors, including the water hardness in
your area. You can set the water hard
-
ness dial in the detergent dispenser as
a reminder.
^ Turn the dial to the desired setting.
Use the tool supplied with the ma-
chine. It is located behind the deter
-
gent drawer, on the left hand side
(see Cleaning and Care).
1 = soft, 4 = very hard water
INSTALLATION INSTRUCTIONS
35