Filter
Top Products
Delay start/Time remaining indicator
Time display “H:min”
The Time display has a dual function.
–
It shows the time remaining in the
wash program, and
–
it shows the programmed “Start de
-
lay” remaining before the program
begins.
Delay Start
Upon turning on the machine, the “De
-
lay start” lamp will be blinking. The start
of the program can be delayed up to 9
hours and 30 minutes.
Entering the start delay:
– Press the button to the left of the “De-
lay start” lamp as many times as
necessary until the desired time de-
lay appears. Each time the button is
pressed, the delay will increase by
30 minutes.
Select the program
–
The display will begin counting back
-
wards in one minute increments. The
“Delay start” lamp will remain lit.
Program start
–
When the delay time reaches zero,
the “Time remaining” lamp will illumi
-
nate, and the “Delay start” lamp will
go out. The display will now show the
time remaining in the wash program.
Deleting the start delay
–
When the display reaches “9 h 30
min”, press the button to the left of
the “Delay start” lamp and the delay
will be deleted.
Remaining time
The display will count down the time re
-
maining in the wash program in one
minute increments as soon as:
–
A program is selected, or
–
The time delay reaches zero.
Delay start/Time remaining indicator
20