Positioning and securing the
machine
To ensure stability the washer must first
be aligned and then secured to the
countertop.
^
Open the door.
^ Screw the washer to the countertop
through the left and right holes in the
front trim.
Do not use silicone sealant to seal
the gaps between the machine and
any neighboring cabinets/
appliances. This will block
ventilation to the circulation pump.
Protecting the countertop
Important for machines with steam
condenser (depending on model):
To prevent steam damage to the
countertop, adhere the protective foil
9
13
/
16
"x22
13
/
16
"(25x58cm)
underneath the countertop near the
steam condenser.
Cover plate (protects the countertop)
Depending on the requirements for
installation, a cover plate can be
ordered from Miele.
This protects the underside of the
countertop from steam damage.
Installation
67