Filter
Top Products
Switching the machine on and off
c DRYING
The additional programme "DRYING"
can be selected for 10 minutes steps
up to a total of 80 minutes immediately
after the selection of a cleaning pro-
gramme except for (except A "COLD").
Selecting the drying time
Press c as many times as necess-
ary to change the drying time step
by step until the desired time is dis-
played (shown in the display field).
For example:
Press once - 10 mins
Press twice - 20 mins and so on.
The drying cycle will automatically
begin 10 minutes after the final rinse.
The drying time display will then count
down as time goes on.
Selecting the Drying Temperature
The drying temperature is set using the
temperature selector for the (TA) Drying
Unit.
To do this:
Take off the service panel (see "Elec-
trical Connection").
Check the setting of the TA tempera-
ture selector. the temperature can be
freely set between 55°C and 95°C
and is electronically controlled.
– approx. 95°C (max. temperature) for
normal items (set ex-works),
– approx. 70°C
for items with parts made of rubber,
latex or plastics, with a specified tem-
perature tolerance,
– approx. 55°C
for items which are particularly heat-
sensitive.
Please use the key supplied to switch
over.
Note:
If on completion of a programme
sub-
sequent drying is necessary:
Select the programme q DRAIN
(running time only approx. 1 minute)
with the additional programme c
DRYING (see above).
Switching the machine on and off
25