Filter
Top Products
^
Completely unwind the padding
cover attached to the roller and let it
hang down smoothly.
^
Hold the corners of the padding
cover, pull taut and keeping taut lay
over the heater plate.
The slot which holds the ironing
cover is now at the top.
^
Insert the long edge of the new
ironing cover into the retaining slot
with the side seams inside (upside
down). Keep side ties hanging free
and smooth out.
^
Turn the roller by hand in the
direction you iron (see arrow) until the
retaining slot is at the bottom.
^
Turn the rotary iron on.
Cleaning and Care
26