Filter
Top Products
Tablecloths
^
Avoid folds by ironing the middle first.
^ Place the tablecloth crossways so
that the ends hang over to the left
and right.
^ Iron the middle section.
^
Fold in half with unironed edges
together and place over the left end
of the roller with the ironed middle
section hanging over the edge to
prevent creasing. Then pass both
sides of the the non ironed sections
through the rotary iron.
Napkins, hand towels
^
Lay the item with the straight grain of
the fabric to the feed board.
This will prevent it from loosing its
shape and will be easier to fold.
Pass handkerchiefs diagonally through
the rotary iron and, if necessary, fold
them and then iron again.
^
Please use the whole length of the
roller.
Sheets and bedspreads
Sheets may be ironed like tablecloths,
or if a lengthwise fold is acceptable,
fold the sheet together lengthwise and
iron it on both sides.
To accentuate embroidery and raised
patterns on bedspreads, iron first in
one direction and then in the other.
Pillow cases
^ Lay the pillowcase on the feeder
plate, position under the heater plate
and iron in one step.
If the open end has buttons, only
pass it through the rotary iron if the
buttons are heat resistant.
Tips on ironing
20