Filter
Top Products
Thermostat
control
position
Type of
fabric
Steam
•
••
•••
Nylon / Silk
Wool
Cotton, Linen
No
No
Yes
It is recommended not to use steam in the • and
•• thermostat positions, as water could drip.
-Set the desired temperature with the thermostat
control (J), depending on the type of cloth to be
ironed (Fig. 3).
-The appliance will be ready for use when the
pressure indicator LED (E) lights up (Fig. 4).
While ironing, this LED (E) goes on and off auto-
matically, this is normal.
-By pressing the steam switch (H) you will get a
constant steam jet (Fig. 5). The steam stops when
you release the switch.
How to fill the boiler while ironing
To fill the boiler, proceed as follows:
-Eliminate steam pressure from inside the boiler
by switching on the steam switch (H) (Fig. 5).
-Turn off the boiler (B) and iron (A) switches.
-Unplug the appliance from the mains.
-Carefully unscrew the cap (F) to let the residual
steam out of the boiler.
-Wait for some minutes and carefully pour 1l of
water into the boiler using a jug (Fig. 1).
-Carefully close the cap (F) again, screwing it to
the end.
Vertical ironing
It is possible to iron hanging curtains, garments
on their own hangers... (Fig.6)
-Adjust the iron thermostat control (J) to the maxi-
mum temperature.
-Iron from top to bottom and press the iron steam
switch (H).
Important: For cotton and linen clothes, it is rec-
ommended to put the base of the iron in contact
with the fabric. For more delicate fabrics, it is rec-
ommended to keep the base of the iron at a dis-
tance of some centimetres.
Dry ironing
-Connect the professional iron to the
mains.
-Turn on the iron switch (A).
-Set the iron temperature with the thermostat con-
trol (J), depending on the fabric to be ironed.
After each ironing
-Switch off the professional iron by pressing
switches (B) and (A).
-Unplug the power cable (G) from the mains.
-Clean the base of the iron while it is still hot,
using a damp cloth, after each use.
-The rest of the appliance can also be cleaned us-
ing a damp cloth.
Never submerge the appliance in water or any
other liquid, or hold it under a running tap. Do
not use solvents or abrasive products to clean
it.
Maintenance
With the boiler’s descaling system, limescale in-
crustations are reduced thanks to the exclusive
features of the stainless material used. To clean the
inside of the boiler, you simply have to proceed as
follows every three months:
Fill the boiler with tap water, shake and empty. Re-
peat these steps two or three times consecutively.
To descale:
-Unplug. Empty the content of a bag into the boiler.
Fill with water and select the steam position.
-Plug in. Switch the professional iron on.
-Place the iron in the ironing position. Activate the
steam, shake the iron softly.
-Let the product work for 10 minutes.
-Rinse thoroughly with water & empty completely.
MW_EX_23810_BRAVISSIMO_PRO 2_IM.indd 5MW_EX_23810_BRAVISSIMO_PRO 2_IM.indd 5 11/17/2009 12:49:22 PM11/17/2009 12:49:22 PM