Filter
Top Products
22
WASHER DRAIN SYSTEM
The washer can be installed using the standpipe drain system
(oor or wall), the laundry tub drain system, or the oor drain
system.
Standpipe drain system – wall or oor
The standpipe drain requires a minimum diameter standpipe of
2" (50 mm). The minimum carry-away capacity can be no less
than 10 gal. (38 L) per minute
.
The top of the standpipe must be at least 30" (762 mm) high
and no higher than 96" (2.4 m) from the bottom of the washer.
Laundry tub drain system
The laundry tub needs a minimum 20 gal. (76 L) capacity.
The top of the laundry tub must be at least 30" (762 mm)
above the oor.
Floor drain system
The oor drain system requires a siphon break that may be
purchased separately.
The siphon break (Part Number 285834) must be a minimum of
28" (710 mm) from the bottom of the washer. Additional hoses
might be needed.
Floor
30
" min.
(762 mm)
30
"
(762 mm)
28
"
(710 mm)
Syphon-
break
Wall