Filter
Top Products
20
Reverse Door Swing
You can change your door swing from a right-side opening to a left-side opening, if desired.
1. Place a towel or soft cloth on top of the dryer or work space to protect the surface.
Remove the door assembly
1. Remove the 4 screws that hold the door hinge on the front panel of the dryer.
2. Lay the door assembly on a flat, protected surface with the inside (inner door assembly)
facing up.
3. Remove the 6 Phillips head screws to release the outer door assembly from the inner door
assembly, as indicated below. See illustration. It is important that you remove only the
6 indicated screws.
4. Lift the inner door assembly off the outer door assembly.
5. Rotate outer door 180°.
Reverse hinge
1. Use a small flat-blade screwdriver to remove 2 plug strips from the inner door. Slide the
head of the screwdriver under the plugs, being certain not to scratch the inner door
surface. Lift up.
A.Dryer front panel
B.Door assembly
A
B
180˚