Maytag MLI7500AAW Iron User Manual


 
6
SETTING THE TEMPERATURE
1. Place the iron on the
cradle.
2. Press the steam
button down.
3. Press the
temperature control
button until the desired temperature
indicator light is flashing.
The temperature setting cannot be
changed unless the iron is on the
cradle.
Refer to the Fabric Guide (shown
below) to select proper temperature
setting.
Irons heat up more quickly than they
cool down, so start with lower
temperature settings and gradually
increase as needed.
When ironing fabric blends, select a
temperature setting for the fabric
component that requires the lowest
temperature.
When ironing fabrics that are
especially susceptible to heat, first
“test the fabric” by ironing in an
inconspicuous area of the fabric.
Utilize a pressing cloth as needed.
Be sure to read garment care labels
since using improper temperature
settings could damage fabrics.
Settings
Choose the appropriate setting to suit the
fabric.
Fabric Guide
Setting Synthetics Wool/Silk Linen/Cotton
Acrylic Silk Linen
Acetate Wool Cotton
Fabric Type
Nylon Rayon
Velvet
Polyester
Temperature Low Medium High
Note: When ironing velvet, use steam but do not let the iron touch the fabric.
Test an inconspicuous area first before proceeding.
The steam range is indicated for higher
temperature settings.
When steam-ironing fabrics that require
lower temperature steam than is available
with the lowest steam setting, a pressing
cloth suitable for use with the particular
steam setting should be placed on top of
the fabric.
Press
Wait until the
selected light
begins to flash.