Maytag MLI7500AAW Iron User Manual


 
2
Be sure that these precautions
are carefully followed.
SAFETY PRECAUTIONS
When retracting the electrical cord, keep
hold of the plug.
If the plug is not held,
the uncontrolled moving
plug may cause injury.
Be sure that your hands and arms do not
come into contact with the hot steam.
Touching hot steam
can cause burns.
Do not touch high heat areas, such as the
hot soleplate or support area.
Touching hot areas can cause burns.
Do not direct steam toward people or
toward clothes that are being worn by a
person.
Hot steam can cause burns.
Prevent the entry of dust and dirt into the
charging pins and contact points area. Be
sure that metal objects, such as pins or
wires, never come into contact with these
areas.
Touching the contact points with any pins or wires can
cause short-circuiting, electric shock and fire.
Do not tilt the iron or shake it rapidly back
and forth.
These actions can cause hot water to leak from the
water inlet/outlet spout, resulting in possible burns.
Do not use steel wool or other abrasives
to polish the charging pins.
This action may result in
faulty connections.
Do not press the burst of steam button
rapidly, over and over again.
If the burst of steam button is
pressed at intervals of less than
2 seconds, hot water droplets
may be discharged, possibly
causing burns.
Do not pour water onto the iron or cradle.
This action
may cause
a malfunction.
Be sure that the soleplate does not come
into contact with the surface of the iron
cradle or case.
This action may
deform or
damage the
surface of the
iron cradle or case.