Filter
Top Products
9
Before You Call (continued)
L
eaks Water
•
Make sure water inlet hose connections are tight at faucet and water valve.
•
Make sure end of drain hose is correctly inserted and secured to drain facility.
• Avoid extended soaking – soak for 30 minutes or less.
• Avoid overloading.
Is Noisy
• Be sure washer is leveled properly as outlined in installation manual.
• Weak floors can cause vibration and walking.
• Be sure rubber feet are installed on leveling legs.
• Operating sounds will vary depending on agitation speed.
Fills with the Wrong Temperature Water
• Turn both faucets on fully.
•
Make sure temperature selection is correct.
• Make sure hoses are connected to correct faucets and inlet connections. Be sure water supply is regulated correctly.
Flush water line before filling washer.
• Check the water heater. It should be set to deliver a minimum 120° F (49° C) hot water at the tap. Also check water
heater capacity and recovery rate.
• Disconnect hoses and clean screens. Hose filter screens may be plugged.
Cycle Selector Advances Through “Off”
• Extra rinse is selected.
For further assistance contact Maytag Appliances Sales Company, Maytag Customer Assistance:
U.S. 1-800-688-9900 or Canada 1-800-688-2002
U.S. customers using TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080.
NNOOTTEE:: IInn oouurr ccoonnttiinnuuiinngg eeffffoorrtt ttoo iimmpprroovvee tthhee qquuaalliittyy ooff oouurr aapppplliiaanncceess,, iitt mmaayy bbee nneecceessssaarryy ttoo mmaakkee cchhaannggeess ttoo
tthhee aapppplliiaannccee wwiitthhoouutt rreevviissiinngg tthhiiss gguuiiddee..