Filter
Top Products
21
ow to use washer
H
1. Press the Power button.
2. Select a cycle.
3. Press the Option button
(Rinse+Spin light up).
4. Press the Start/Pause.
1. Press the Power button.
2. Select the spin speed.
3. Press the Start/Pause.
1. Press the Power button.
2. Select the Refresh program.
3. Press the Steam Wash button
repeatedly until the correct item is
displayed.
4. Press the Start/Pause button.
For better performance load 3
item or less.
When Refresh cycle finishes,
laundry will continue to be tumbled
slowly for up to 30 minutes to
prevent wrinkling. You can open
the door in this time by pressing
any button.
When you select "No Spin", it will
still rotate for a short time with low
speed to drain quickly.
Rinse+Spin
• Medic Rinse : For best results or for
cleaner rinsing.
• Rinse+Spin : This can be helpful in
preventing fresh stains from setting in
fabrics. This is a separate cycle.
• Time Save : This option can be used to
reduce the time of a wash program.
• Intensive : If the laundry is normal and
heavily soiled, “Intensive” option is
effective.
Option
• Rinse
+
+Hold : Add rinse once then after
rinsing process, the course is paused until
start button is pressed again.
• Normal+Hold : The course is paused
until start button is pressed again when
rinse is finished.
• Rinse
++
: Add rinse twice.
• Rinse
+
: Add rinse once.
Rinse
• By pressing the Temp. button the water
temperature can be selected.
- Cold
- 20°C, 30°C, 40°C, 60°C, 95°C
• Water temperature can be selected
according to the program.
Temp.
Spin Only
Refresh Cycle
■ Options ■ Other functions