LG Electronics DLGX8001W Clothes Dryer User Manual


  Open as PDF
of 144
 
45
ENGLISH
OPTIONAL ACCESSORIES
Stacking kit installation
This stacking kit includes:
• Two (2) side rails
• One (1) front rail
• Four (4) screws
Tools Needed for Installation:
• Phillips screwdriver
To ensure safe and secure installation, please observe the
following instructions.
w
WARNING
• 
• 


There is a risk of serious back injury or other injuries.
• 
Failure to follow
this warning can result in serious injury.
• 
Failure to follow
this warning can result in serious injury.
•  Failure to follow
this warning can result in serious injury.
• 

 Failure to do so can result in electrical shock, fire,
explosion, or death.
1. Make sure the surface of the washer is clean and dry. Remove
paper backing from the tape on one of the stacking kit side
brackets.
2. Fit the side bracket to the side of the washer top as shown in
the above illustration. Firmly press the adhesive area of the
bracket to the washer surface. Secure the side bracket to the
washer with a screw on the back side of the bracket. Repeat
steps 1 and 2 to attach the other side bracket.
OPTIONAL ACCESSORIES
MFL62512869_en_120215.indd 45 2012.2.15 11:16:10 AM
 previous next