Filter
Top Products
34
HOW TO USE
Following are instructions for starting and using your new dryer. Please refer to specific sections of this manual for more detailed
information.
Check the lint filter before every
load
Always make sure the lint filter is clean before starting a new load;
a clogged lint filter will increase drying times.
To clean, pull the lint filter straight up and roll any lint off the filter
with your fingers. Do not rinse or wash the filter to remove lint.
Push the lint filter firmly back into place. See
for more information.
Always ensure the lint filter is properly installed before running
the dryer. Running the dryer with a loose or missing lint filter will
damage the dryer and articles in the dryer.
Sorting load
Fabric Care Labels
Most articles of clothing feature fabric care labels that include
instructions for proper care.
Grouping Similar Items
For best results, sort clothes into loads that can be dried with the
same drying cycle.
Different fabrics have different care requirements, and some
fabrics will dry more quickly than others.
Loading the Dryer
w
WARNING
To reduce the risk of fire, electric shock, or injury to persons when
using this appliance, follow basic precautions, including the
following:
•
Failure to do so can
result in fire, explosion, or death.
•
Failure to obey this warning
can result in fire, explosion, or death.
Tumble
dry
Dry
Normal
Permanent Press
/
wrinkle resistant
Gentle/
delicate
Do not tumble dry
Do not dry
(used with
do not wash)
Fabric Care Labels
Heat
setting
High
Medium
Low
No heat/air
Lint Filter
NOTE
• Combine large and small items in a load.
• Damp clothes will expand as they dry. Do not overload the
dryer; clothes require room to tumble dry properly.
• Close zippers, hooks, and drawstrings to prevent these items
from snagging or tangling on other clothes.
MFL62512869_en_120215.indd 34 2012.2.15 11:15:56 AM