Open as PDF
HOW TO USE
HOW TO USE
Operating the Dryer
Press the Power button to turn on the dryer. The cycle LEDs will illuminate and
Press the Start/Pause button to begin the cycle. The cycle can be paused at
any time either by opening the door or by pressing the Start/Pause button. If
settings will be lost.
Turn the cycle selector knob either direction until the LED for the desired cycle
is on. The preset temperature, dry level, and option settings for that cycle will
changed if desired. This can be done using the cycle modifier buttons as shown
When the cycle is finished, the chime will sound if it is set. Remove your
clothing from the dryer immediately to reduce wrinkling. If
Wrinkle Care is
selected, the dryer will tumble briefly every few minutes to help prevent
wrinkles from setting in the clothes.
If the lint filter has not already been cleaned, lift out the filter and remove the
lint from the last load. This will help ensure the fastest and most efficient drying
Load the dryer with the wet laundry from the washer. If the load is extra large,
you may need to divide it into smaller loads for proper performance and fabric
Not all options or modifiers are available on all cycles. A different chime will
sound and the LED will not come on if the selection is not allowed.