LG Electronics DLEX5780WE Clothes Dryer User Manual


 
18
INSTALLATION INSTRUCTIONS
b. While sliding the lock rod right, lift the right end up
and out of the guides.
3FNPWFUIFVQQFSIJOHFQJWPU
Once the top lock rod has been removed, the
hinge pivot can easily be removed from the hinge
assembly on the upper left and set aside.
3FWFSTFUIFVQQFSIJOHFBTTFNCMZBOEIJOHF
GJMMFS
Lift out the upper hinge filler (on the right) and set it
aside.
Carefully lift the upper hinge assembly (on the left)
out of the outer door frame, using a small flat blade
screwdriver if necessary. Rotate the hinge assembly
EFHSFFTBOEJOTUBMMJUPOUIFVQQFSSJHIUTJEFPG
the outer door. You will need to press firmly to install
the hinge assembly.
5IFIJOHFQJWPUSFNPWFEJOTUFQXJMMCFJOTUBMMFE
later.
Reversing the Door (continued)
interlock buttons
side lock rod
NOTE
%POPUSFNPWFUIFUXPJOOFSMPDLSPETTFFQBHF
located underneath the top lock rod. They do NOT
need to be reversed
upper hinge
assembly
upper hinge
pivot
upper hinge assembly
upper hinge pivot
Spring
-JGUPVUUIFUXPUPQJOUFSMPDLCVUUPOT
Lift out the two grey interlock buttons from the top of
the outer door and set them aside for later use.
-JGUPVUUIFHSFZJOUFSMPDLCVUUPOJOUIFTJEFPGUIF
door.
Make sure to remove the spring with the interlock
button and to keep the two together. Set the interlock
button aside. Do not confuse with interlock buttons
from the top of the outer door.
3FNPWFUIFTJEFMPDLSPE
Remove the side lock rod from
the lower hinge bracket by lifting
the top end of the rod and sliding
it toward the top of the door. The
spring should remain attached to
the lock rod. Set the lock rod aside.
3FNPWFUIFUPQMPDLSPE
a. Slide the lock rod to the right to remove it from the
hinge assembly on the left side.