18
Check Lint Screen
The Check Lint Screen display reminds you to check the lint
screen. CHECK LINT SCREEN is displayed when the machine is
turned on. The message turns off when the lint screen is opened
and cleaned, Start is pressed, or after 5 minutes have elapsed.
Control Locked
A lock icon will be displayed in the Status window when this
option is enabled.
Indicator lights
Other indicator lights on the control panel show Cycle,
Temperature and Cycle End Tone settings selected.
The Status display shows the estimated or actual time remaining
in a cycle.
Insert Lint Screen
If the lint screen is opened while the dryer is running, the dryer
will pause and the message INSERT LINT SCREEN will be
displayed. Once the lint screen is inserted, PRESS START will be
displayed.
Insert Dry Rack
After selecting the Dry Rack cycle, if no drying rack is in the dryer,
the machine will beep three times and INSERT DRY RACK will be
displayed.
Cycles
Select the drying cycle that matches the type of load you are
drying. See Automatic or Manual Preset Cycle Settings charts.
AUTOMATIC CYCLES
Automatic Cycles allow you to match the cycle to the load you
are drying. See the following “Automatic Preset Cycle Settings”
chart. Each cycle dries certain fabrics at the recommended
temperature. A sensor detects the moisture in the load and
automatically adjusts the drying time for optimal drying.
White/Cotton
Use this cycle to get High heat for cotton towels, sheets or work
clothes.
Heavy Duty
Use this cycle to get High heat for heavyweight mixed loads, as
well as bulky items including bedspreads.
Normal/Casual
Use this cycle to get Medium heat for drying sturdy fabrics such
as sport shirts, casual business clothes and permanent press
blends.
Delicate
Use this cycle to get Low heat for drying synthetic fabrics,
washable knit fabrics and no-iron finishes.
Extra Delicate
Use this cycle to get Extra Low heat to gently dry items such as
lingerie, exercise wear or sheer curtains.
*Estimated Time with Automatic Level (Normal) setting.
MANUAL CYCLES
Use Manual Cycles to select a specific amount of drying time and
a drying temperature. When a Manual Cycle is selected, the
Estimated Time Remaining display shows the actual time
remaining in your cycle. You can change the actual time in the
cycle by pressing plus (+) or minus (-). See “Starting Your Dryer.”
Timed Dry
Use this cycle to complete drying if items are still damp after an
Automatic Cycle. Timed Dry is also useful for drying heavyweight
and bulky items such as bedspreads and work clothes.
Touch Up
Use this cycle to help smooth out wrinkles from such items as
clothes packed in a suitcase or items wrinkled from being left in
the dryer too long.
Rapid Dry
Use this cycle for drying small loads or loads that need a short
drying time.
Dry Rack
Use this cycle with the drying rack to dry clothes without
tumbling. See “Drying Rack.”
Automatic Preset Cycle Settings
Automatic Cycles
Load Type
Temp. Time*
(Minutes)
WHITE/COTTON
Towels, sheets, work clothes
High 41
HEAVY DUTY
Heavyweight mixed loads,
bulky items
High 44
NORMAL/CASUAL
Corduroys, permanent press
Medium 36
DELICATE
Lingerie, blouses
Low 32
EXTRA DELICATE
Exercise wear, sheer
curtains, lace
Extra Low 22