Filter
Top Products
9
Handwash/Wool option
Use this option to gently clean washable wool garments
(refer to your garment’s care label).
To use this option
1. Turn the FABRIC SELECT option to Handwash/Wool.
2. Set the TEMPERATURE selector to the
SENSORSURE™ Cold/Cold setting.
3. Set the Cycle Control knob to a 6-minute Normal wash
cycle.
SENSORSURE
™
Temperature Control
SENSORSURE temperature control electronically senses
and maintains a uniform water temperature by regulating
incoming hot and cold water.
SENSORSURE keeps warm and cold water temperatures
within recommended ranges for best detergent
performance and fabric care.
■ Cold wash is regulated at approximately 75°F (24ºC).
■ Warm wash is regulated at approximately 100°F (38°C).
To select SENSORSURE
Turn the TEMPERATURE selector to a SENSORSURE
setting.
Rinse and Spin
When using extra detergent for heavily soiled clothes, or
washing special-care items, you may find an extra rinse
and spin is needed.
1. Push in the Cycle Control knob and turn it clockwise to
any of the Rinse settings.
2. Pull out the Cycle Control knob. The washer fills to the
selected load size, agitates, drains, and spins.
NOTE: An EXTRA RINSE option is available (on some
models). See “Starting Your Washer.”
Drain and Spin
A drain and spin may help shorten drying times for some
heavy fabrics or special-care items by removing excess
water.
1. Push in the Cycle Control knob and turn it clockwise to
any of the Spin settings.
2. Pull out the Cycle Control knob. The washer drains,
then spins.
Self-Cleaning Lint Filter
Your washer has a self-cleaning lint filter at the bottom of
the basket. Wash and rinse water flow over the filter during
agitation, separating the lint from the water. The lint spins
out of the system during the spin part of the cycle.
If your washer drains into a tub, remove any lint collected
in the tub or strainer.