Kenmore 796.4031#9## Washer User Manual


 
NORMAL SOUNDS YOU MAY HEAR
The following sounds may be heard whilethe washeris
operating. They are normal.
Clicking:
Door lock relay when the door locks and unlocks.
Spraying or hissing:
Water spraying or circulating during the cycle.
Humming or gurgling:
Drain pump pumping water from thewasher at the end of a
cycle.
Splashing:
Clothes tumbling in the drum during the wash and rinse cycles.
BEFORE CALLING FOR SERVICE
Your washing machine is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If
your washer does not function properlyor does notfunction at all, check the following before you call for service.
Rattling and clanking noise
Check if... Then...
I Foreign objects, such as keys, coins, or safety pins, may be I Stop washer and check drum and drain filter for foreign objects. If
I in drum or pump. I noise continues after washer is restarted, call for service.
Thumping sound
Check if... Then...
Heavy wash loads may produce a thumping sound. This is normal. Ifsound continues, washer is probablyout of
balance. Stop and redistribute wash load.
Washer load may be out of balance. Pause the cycle and redistribute the load after the door unlocks.
Washing shoes or tightly tangled clothes.
Vibrating noise
Check if... Then...
Shipping bolts and/or packaging materials not removed. See Unpacking and Removing Shipping Bolts in the Installation
Requirements on page 8.
Wash load may be unevenly distributed in the drum. Pause the cycle and redistribute the load after the door unlocks.
Not all levelingfeet are resting firmly and evenly on the See Leveling the Washer in the Installation Instructions on page 11.
floor.
Floor not rigid enough. Make sure that the floor is solid and does not flex.
See Flooring in the Installation Requirements on page 7.
Water leaking around washer
Check if... Then...
Fill hose connection is loose at tap or washer. Check hoses. Check and tighten hose connections.
House drain pipes are clogged. Unclog drain pipe. Contact a plumber if necessary.
Drain hose has come out of drain. Tie drain hose to inlet hose or standpipe to prevent it from coming
Drain hose is not inserted far enough, out during drain. It should be inserted about 8-12 inches into the
standpipe.
Excessive sudsing
Check if...
I Too much detergent or incorrect detergent.
Only use detergent with the liE (High-Efficiency) logo.
See Detergent Use in the How to Use section on page
16-17.
i
I
25