Filter
Top Products
13
After Each Use
• Set the Variable Steam Control
Dial on the base of the steam
station to the MIN position and
turn the Temperature Control dial
on the iron to MIN.
• Switch the power off at the power
outlet and disconnect the power
cord from the power outlet.
• Detach the Water Tank from the
base and remove the Anti-Scale
Filter Cartridge. Invert the water
tank (over a sink or bucket) to
empty the remaining water.
Once the water tank is empty,
replace the filter and place the
water tank back into the base.
• Rest the iron on the soleplate on
the Iron Rest of the steam station
and allow to cool before moving
or storing.
NOTE: It is not recommended
to leave water in the water tank
over long periods of time to
avoid mould. Empty the water
tank after each use.
Care and Maintenance
Anti-Scale Filter Cartridge
• To reduce scale build-up
and keep your steam station
performing at its best, the Anti-
Scale Filter Cartridge should be
cleaned regularly. How often
depends on the hardness of
your water, and how much
you use the iron.
• To clean the Anti-Scale Filter
Cartridge, remove from the
water tank.
• Dip the base of the cartridge in a
bowl of hot water and let soak for
up to an hour.
• Carefully remove from the water
and shake cartridge to remove
excess water.
• Fit the Anti-Scale Filter Cartridge
back into the water tank ready
for next use.