Filter
Top Products
10
Continuous Steam Ironing
WARNING: To extend
the life of the pump on
your Steam Station, do
not operate the steam
function for more than
10 minutes continuously.
• Before first use, it is recommended
to allow the iron to steam for
about one minute (the time that
it takes the pump to start and
the first bursts of steam to emit
from the iron) before placing the
iron on your garment. Once the
pump has started, press the Steam
Control Button a few times before
commencing ironing.
IMPORTANT: When the
iron is being used for
the first time, the Steam
Control Button must be
held down for about
1 minute until the
pump starts and
steam is produced.
• Wait until the Iron Thermostat
Light goes out three times to
ensure temperature is reached.
Press on the Steam Control
Button. Steam will emit as long as
you hold down the Steam Control
Button at the front of the button
and stop when released.
NOTE: If you want to use steam,
the Thermostat Control dial on
the iron must be set to the area
marked STEAM.
• Alternatively, press the Steam
Control Button down and slide
back slightly on the Continuous
Steam Lock mechanism. Steam
will emit continuously while
the Continuous Steam Lock is
activated. To release, slide the lock
mechanism forward until the Steam
Control Button rises upwards. (Fig 1).
L
I
N
E
N
C
O
T
T
O
N
W
O
O
L
S
Y
N
T
H
E
T
I
C
S
T
E
A
M
MAX
NOTE: Do not press the Steam
Control Button or slide the
Continuous Steam Lock while
the water tank is empty. Do not
press the Steam Control Button
or slide the Continuous Steam
Lock when the iron is sitting on
the Iron Rest.
IMPORTANT: Before
steam ironing, you should
ensure that the garment
can be steam ironed
according to its Textile
Care Labelling.
• To control the flow of steam, turn
the Variable Steam Control Dial
at the back of the steam station
base until the desired steam
pressure is reached. (Fig 2).
Operating Your Kambrook Steam Station continued
Fig. 1