John Lewis JLWM 1604 Washer User Manual


 
Pressing the corresponding buttons to
change those values. The green pilot light of
the button 9 starts flashing.
The dial can be turned either clockwise or
counterclockwise. Turn to position «Off» to
reset programme/Switching the machine off.
At the end of the programme the
selector dial must be turned to
position «Off» , to switch the machine
off.
Caution! If you turn the programme
selector dial to another programme
when the machine is working, the
red pilot light of button 9 will blink 3
times to indicate a wrong selection.
The machine will not perform the
new selected programme. The
message Err is displayed for a few
seconds. The machine will not
perform the new selected
programme.
Select the spin speed or
the available functions
Press button 4 repeatedly to change the spin
speed if you want your laundry to be spun at
a speed different from the one proposed by
the washing machine.
You can also choose «No Spin» («0»),
«Rinse Hold » or «Quiet» function. The
display will show the corresponding
description.
Select the desired
options
Press the relevant buttons to select the
available options. Depending on the
programme, different options can be
selected together. These must be selected
after choosing the desired programme and
before pressing the «Start/Pause» button. If
an option which is not compatible with the
set wash programme is selected, the red
Start/Pause light flashes 3 times and the
message Err is displayed for a few seconds.
When the option is set, it will appear in the
relevant rectangle on the display or the
relevant symbol icon will be displayed.
For the compatibility among the
washing programmes and the options
see chapter «Washing Programmes».
Select the delay start
Before you start the programme, press this
button repeatedly to select the desired
delay. The set delay time value (up to 20
hours) will appear on the display for a few
seconds, then the duration of the
programme will appear again. The wash
programme can be delayed from 30 min - 60
min - 90 min, 2 hours and then by 1 hour up
to a maximum of 20 hours.
You can cancel the delay time at any
moment, before you press the «Start/
Pause» button.
Selecting the delayed start
You must select this option after you have
set the programme and before you press the
«Start/Pause» button.
Select the programme and the required
options.
Select the delay start.
Press button 9: the machine starts its
hourly count down. The programme will
start after the selected delay has expired.
Opening the door throughout the
delay time
If you wish to add laundry in the machine
during the delay time
Press button 9 to put the machine in
pause.
Add the laundry, close the door
14