Filter
Top Products
9
• An incorrect option selection has been made:
this is indicated by the message Err when a function
incompatible with the current programme is selected.
• An alarm code indicates a fault in the machine
operation (see the relevant chapter).
10 Programme phase indicator
lights
When you select a programme, the lights relevant to
the phases that form the programme light up.
After you have started the programme, only the light
relevant to the phase that is currently being carried out
will remain lit.
When the programme has finished, the “End” light
comes on and a flashing zero appears on the display.
ATTENTION!
If you turn the programme selector dial to another
programme when the machine is working, all the lights
of the programme progress display will flash for about 2
seconds but the machine will not perform the new
selected programme.
End
Prewash
Wash
Rinse
Rinse hold
Drain
Spin
Drying
E20