Filter
Top Products
6. Remove the fluff from fine filter. It is
best to use a damp hand for this
purpose.
Clean the entire filter area
The filter area does not have to be
cleaned after every drying cycle, but
should be checked regularly and cleaned
of fluff if necessary.
7. To do this, grip the top of the large
mesh filter and pull it forwards until it
comes loose from the two brackets.
8. Remove fluff from the entire filter area.
It is best to use a vacuum cleaner for
this purpose.
9. Press both journals of the large mesh
filter into the brackets on the loading
door until they snap into place.
10. Re-insert fine filter.
11. Press against the large mesh filter until it
locks into the interlock.
If the fine filter is not fitted, the large
mesh filter will not snap into place
and the loading door cannot be
closed.
Cleaning the door seal
Wipe the door seal with a damp cloth
immediately after the drying cycle has
finished.
Emptying the water
reservoir
Empty the water reservoir after every drying
cycle.
If the water reservoir is full, an active
programme will break off automatically and
the warning lamp Full tank lights. In order to
continue the programme, the water
reservoir must first be emptied.
18